LevelOne Broadband VPN Gateway User Guide
Firewall Rule
Clicking the "Add" button in the Firewall Rules screen will display a screen like the example below.
| Figure 39: Firewall Rule |
Data - Firewall Rule Screen | |
|
|
Name | Enter a suitable name for this rule. |
|
|
Type | This determines the source and destination ports for traffic |
| covered by this rule. Select the desired option. |
|
|
Source IP | These settings determine which traffic, based on their source IP |
| address, is covered by this rule. |
Select the desired option:
•Any - All traffic from the source port is covered by this rule.
•Single address - Enter the required IP address in the "Start IP address" field". You can ignore the "Subnet Mask" field.
•Range address - If this option is selected, you must complete both the "Start IP address" and "Finish IP address" fields. You can ignore the "Subnet Mask" field.
•Subnet address - If this option is selected, enter the required mask in the "Subnet Mask" field.
58
