LevelOne Broadband VPN Gateway User Guide

Connection Log

Connection Log

• The Connection Log shows status messages relating to the

 

existing connection.

 

• The Clear Log button will restart the Log, while the Refresh

 

button will update the messages shown on screen.

 

 

Buttons

 

Connect

If not connected, establish a connection to Telstra Big Pond.

 

 

Disconnect

If connected to Telstra Big Pond, terminate the connection.

 

 

Clear Log

Delete all data currently in the Log. This will make it easier to read

 

new messages.

 

 

Refresh

Update the data on screen.

 

 

Connection Details - SingTel RAS

If using the SingTel RAS access method, a screen like the following example will be displayed when the "Connection Details" button is clicked.

Figure 26: Connection Details - SingTel RAS

Data - SingTel RAS Screen

Internet

RAS Plan

The RAS Plan which is currently used.

 

 

Physical Address

The hardware address of this device, as seen by remote devices on

 

the Internet. (This is different to the hardware address seen by

 

devices on the local LAN.)

 

 

IP Address

The IP Address of this device, as seen by Internet users. This address

 

is allocated by your ISP (Internet Service Provider).

 

 

Network Mask

The Network Mask associated with the IP Address above.

 

 

36

Page 39
Image 39
LevelOne FBR-1404TX user manual Connection Details SingTel RAS, Data SingTel RAS Screen, RAS Plan