Leave Time:
Used to declare the Leave Time in unit of centisecond. Valid time range: 60
Leave All Time:
A time period for announcement that all registered device is going to be
Default Applicant Mode:
The mode here means the type of participant. There are two modes, normal participant and
Normal:
It is Normal Participant. In this mode, the switch participates normally in GARP protocol exchanges. The default setting is Normal.
It is
Default Registrar Mode:
The mode here means the type of Registrar. There are three types of parameters for registrar administrative control value, normal registrar, fixed registrar and forbidden registrar, provided for the user’s choice.
Normal:
It is Normal Registration. The Registrar responds normally to incoming GARP messages. The default setting is Normal.
Fixed:
It is Registration Fixed. The Registrar ignores all GARP messages, and all members remain in the registered (IN) state.
Forbidden:
It is Registration Forbidden. The Registrar ignores all GARP messages, and all members remain in the unregistered (EMPTY) state.
Restricted Mode:
This function is used to restrict dynamic VLAN be created when this port received GVRP PDU. There are two modes, disable and enable, provided for the user’s choice.
Disabled:
In this mode, the switch dynamic VLAN will be created when this port received GVRP PDU. The default setting is Normal.
Enabled:
In this mode, the switch does not create dynamic VLAN when this port received GVRP PDU. Except received dynamic VLAN message of the GVRP PDU is an existed static VLAN in the switch, this port will be added into the static VLAN members dynamically.
93
