Lexmark 840 Series manual Load up to Make sure

Load up to	Make sure
25 greeting cards	•	The total thickness of the card stack does not exceed 0.4 inches or
25 index cards		10 mm.
25 photo cards	•	The print side of the cards faces you.
25 postcards	•	The cards are loaded against the right side of the paper support.
	•	The paper guide rests against the left edge of the cards.
10 envelopes	•	The stamp location is in the upper left corner.
	•	The print side of the envelopes faces you.
	•	The envelopes are designed for use with inkjet printers.
	•	The envelopes are loaded against the right side of the paper support.
	•	The paper guide rests against the left edge of the envelopes.
	Warning: Do not use envelopes that have metal clasps, string ties, or
	metal folding bars.
	Notes:
	– Do not load envelopes with holes, perforations, cutouts, or deep
		embossing.
	– Do not use envelopes that have exposed flap adhesive.

25 sheets of labels	•	You follow the loading instructions that came with the labels.
	•	The print side of the labels faces you.
	•	The adhesive on the labels does not extend to within 1 mm of the
		edge of the label.
	•	You use full label sheets. Partial sheets (with areas exposed by
		missing labels) may cause labels to peel off during printing, resulting
		in a paper jam.
	•	The labels are loaded against the right side of the paper support.
	•	The paper guide rests against the left edge of the labels.
20 transparencies	•	The rough side of the transparencies faces you.
	•	You don't use transparencies with paper backing sheets.
	•	The transparencies are loaded against the right side of the paper
		support.
	•	The paper guide rests against the left edge of the transparencies.

Note: Transparencies require more drying time. Remove each transparency as it exits, and allow it to dry to avoid ink smudging.

Loading paper and various paper types

17