Installing the printer
9
Installing and removing options
Installing the printer
CAUTION: The printer weighs 48–82kg (105–181 lb). It requires at least three (3) people to lift it safely. Use the
printer handholds to lift it, do not lift by the front of the printer, and make sure your fingers are not under
the printer when you set it down.
1Unpack the printer.
2Place the printer on the duplex unit or 500-sheet drawer:
aAlign the positioning posts on the duplex or 500-sheet drawer with the holes in the printer.
bLower the printer into place. Make sure it is seated securely.
Installing an output expander
Your printer supports an optional output expander that lets you stack up to 650 sheets of paper in one bin.
Note: After you unpack the output expander, install it immediately. Otherwise, the edges of the mounting
brackets could damage tabletops or fabrics.
1Unpack the output expander and remove any packing material.
2Remove the printer top cover.
Warning: The output expander tray is designed to hold the weight of print material only. Do not use it as a shelf;
excess weight may cause it to disengage from the output expander.
3Align the mounting brackets on the bottom of the output expander with the slots in the top of the printer.
4Lower the output expander into place.