Lexmark MS00850 manual Fax partition inoperative. Contact system administrator, Load src with, 254

Touch Continue to clear the message.

Fax partition inoperative. Contact system administrator.

The fax partition appears to be corrupted. Try one or more of the following:

•Touch Continue to clear the message.

•Turn the printer off and then back on to reset the printer. If the message appears again, then contact your system support person.

Fax server 'To Format' not set up. Contact system administrator.

The printer is in Fax Server mode, but the Fax Server setup has not been completed.

Try one or more of the following:

•Touch Continue to clear the message.

•Complete the Fax Server setup. If the message appears again, contact your system support person.

Fax Station Name not set up

The Fax Station Name has not been entered. Sending and receiving faxes is disabled until fax is configured properly. Try one or more of the following:

•Touch Continue to clear the message.

•Complete the Analog Fax Setup. If the message appears again, contact your system support person.

Fax Station Number not set up

The Fax Station Number has not been entered. Sending and receiving faxes is disabled until fax is configured properly. Try one or more of the following:

•Touch Continue to clear the message.

•Complete the Analog Fax Setup. If the message appears again, contact your system support person.

Load <src> with <x>

<src> is a tray or feeder, and <x> is a paper type or size. Try one or more of the following:

•Load the specified paper in the tray.

•Touch Continue to clear the message and continue printing.

If the printer finds a tray that has the correct paper type and size, it feeds from that tray. If the printer cannot find a tray with the correct paper type and size, it prints from the default source.

•Cancel the current job.

Troubleshooting

254