Lexmark PRO4000 manual From Tray 2 for certain types of print jobs, Customer support, Cable modem

About your printer 13

	Use the	To
7	Paper tray (Tray 1)	Load paper.
8	Second paper tray	Load additional paper.
	(Tray 2)	You can load the same type of paper as in Tray 1. You can also load a different
	Note: This option is	type of paper and change the default paper settings so the printer uses paper
	available only in select	from Tray 2 for certain types of print jobs.
	printer models.
9	Exit bin	Hold paper as it exits.
		Note: For the printer to be ready for any print job, make sure to fully
		extend the exit bin and to flip out the bin extender.
10	Bin extender	Catch the paper as it exits.
		Note: For the printer to be ready for any print job, make sure to fully
		extend the exit bin and to flip out the bin extender.
11	Printer control panel	Operate the printer.

	Use the	To
12	Customer support	Identify the model number of the printer, the customer support hot line,
	label	and the ink cartridge information.
13	Scanner glass	Scan, copy, or fax photos and documents.
14	Power supply with port	Connect the printer to the power cord.
15	Duplex unit	• Print on both sides of a sheet of paper.
		• Access paper jams.

	Use the	To
16	USB port	Connect the printer to a computer using a USB cable.
		Warning—Potential Damage: Do not touch the USB port except when
		plugging in or removing a USB cable or installation cable.
		Note: Remove the sticker to access the port.
17	Ethernet port	Connect your printer to a computer, a local network, an external DSL, or a
		cable modem.
18	LINE port	Connect the printer to an active telephone line through a standard wall jack
		(RJ‑11), DSL filter, or VoIP adapter, or any other adapter that allows you to
		access the phone line to send and receive faxes.

19	EXT port	Connect additional devices (telephone or answering machine) to the printer
		and the telephone line. Use this port if you do not have a dedicated fax line
		for the printer and if this connection method is supported in your country
		or region.

Note: Remove the plug to access the port.