Copying
Scanner glass
Load the original document facedown at the plac ement corner.
Note: The automatic document feeder (ADF) is available only in select printer models.

Tips for copying

Make sure you load the original document or photo facedown on the scanner glass and at the
placement corner. You can load postcards, photos, small items, transparencies, photo paper, or thin
media (such as magazine clippings).
Close the scanner cover, if possible, to avoid dark edges on the scanned image.
Make sure the paper exit tray is fully extended.
When the document to be copied is in place with the settings y ou want, press to start copying.

Making copies

1Load paper.
2Load an original document faceup into the ADF or facedown on the scanner glass.
3From the printer control panel, navigate to:
> Copy > OK > Co pies
4Press the left or right arrow button to select the number of copies.
5From the Copy menu screen, press the up or down arrow button to scroll to the option you want to
set, and then press the left or right arrow button to scroll to the setting you want. If nece ssary, press
OK
to make a selection.
6Select the copy mode:
Press to switch to color mode.
Press to switch to blackandwhite mode.
When you select color or blackonly printing, the light that corresponds to your choice comes on.
7Press .
Note: The selected copy settings are reset to the factory default after two minutes of printer inactivity.

Making a twosided (duplex) copy automatically

The automatic duplex unit supports A4 and lettersize paper. If you need to make twosided copies using
other paper sizes, then see the instructions for making a twosided copy manually.
Note: You cannot make twosided copies on envelopes, card stock, or photo paper.
1Load paper.
2Load the original document faceup into the ADF or facedown on the scanner glass.
3From the printer control panel, navigate to:
> Copy > OK > 2Sided Copies
4Press the left or right arrow button to select a twosided copying option:
If you are copying a onesided document, then press the arrow buttons to scroll to 1sided to
2sided.
If you are copying a two-sided document and using the scanner glass, then press th e arrow buttons
to scroll to 2sided to 2sided.
If you want to specify the page orientation and layout of the original document and the copy, then
press the arrow buttons to scroll to Advanced. Press OK every time you make a selection, and
then press until you reach the Copy menu screen.
Notes:
For long-edged binding, pages are bound along the long edge of the page (left edge for portrait
orientation and top edge for landscape orientation).
For short-edged binding, pages are bound along the short edge of the page (top edge for
portrait orientation and left edge for landscape orientation).
5Press , and then follow the instructions on the display.
Copying 22