Lexmark X2300 Series manual Previewing items before scanning, Finishing the scan

Previewing items before scanning

From the computer	From the control panel
1 Place the item on the scanner	1 Place the item on the scanner
glass. For more information, see	glass. For more information, see
“Placing documents on the	“Placing documents on the
scanner glass” on page 32.	scanner glass” on page 32.
2 Open the All-In-One Center. For	2 Press the	button.
more information, see “Using the	On the computer screen, the
Lexmark All-In-One Center” on
	All-In-One Center appears with a
page 15.
	preview of the item.
The All-In-One Center appears.
	3 Adjust the dotted lines to fit
3 Make sure the Scanning &
	around the portion of the image
Copying tab is selected.	you want to scan.

4From the Scan section, click Preview Now.

5Adjust the dotted lines to fit around the portion of the image you want to scan.

Finishing the scan

1Select the scan destination from the drop-down menu.

Note: If the program you want to use is not listed, select Search for more... in the drop-down box. On the screen that follows, click Add to locate and add the program to the list.

2Change any settings as needed. For more information, see “Customizing a scan job” on page 38.

3When you are finished customizing the image, click Scan Now.

When the document has finished processing, it will open the program to which you chose to send the image.

40