Settings
Audio & Ringtones | Menu 9.1 |
There can be 4 sound modes: General, Vibrate All, Alarm Only and Silent All. General, Vibrate All, Alarm Only and All Silent modes can be changed from the Volume menu (Menu 9.1.2) under Ringtone and Alerts (Menu 9.1.2.1) In addition, pressing and holding the 
[Star] key on idle screen mode can switch between "Vibrating Mode On" and "Vibrating Mode Off". Ear Mic is available when respective instruments are attached.
Shop Tones (Menu 9.1.1)
Connects to AT&T Ringtone Shops.
Volume (Menu 9.1.2)
This menu controls Ringtone, Multimedia, Call and Keypad volume.
Ringtone (Menu 9.1.3)
]Sounds: Shows and plays ring tones. These can be downloaded ring tones from Ring tone shops.
]Alert Type: Supports 3 ring alert types. Ring, Ring and Vibration, and Ring after Vibration.
]Increasing Ringtone: Allows you to select an Increasing Ringtone type which is played when you receive an incoming call. You can elect to turn this On of Off.
Message Tone (Menu 9.1.4)
]Sounds: Shows and plays message tones. These can be downloaded ring tones from Ring tone shops.
]Alert Type: Supports 6 message alert types. Ring Once, Ring Every 2 Min.,
Ring Every 15 Min., Ring & Vibrate, Vibrate, Silent.
nNote
Full length music tracks cannot be set as ringtones.
Alert Tone (Menu 9.1.5)
]Sounds: Allows you to select a set of alert tones. Supports 2 alert tone types, Alert Tone 1 and Alert Tone 2.
]Alert Type: You can select to turn Alert Tones to Ring or Silent.
80
