LG Electronics DR1F9H Initial Settings, General Settings, General Operation, Tuning Band Select

Initial Settings

In this menu system, there are several ways to customize the settings provided. Most menus consist of three levels to set up the options, but some require greater depth for the variety of settings.

General Operation

1.Press HOME and select [Setup] option.

2.Select [Start] option then press ENTER. The Setup menu appears.

3.Use v / V to select the desired option.

4.While the desired item is selected, press B to move to the second level.

5.Use v / V to select the second desired option.

6.Press B to move to the third level.

7.Use v / V to select the desired setting then press ENTER to confirm your selection.

Some items require additional steps.

8.Press RETURN (O) repeatedly to exit the Setup menu.

Note:

Press b to go back to the previous level.

General Settings

Tuning Band Select

1.Select the [Tuning Band] option then press B .

2.Use v / V to select the tuning band (TV or CATV) option then press ENTER.

TV: If you are using a standard antenna to receive channels.

CATV: If you are using basic cable to receive channels.

Auto Channel Set

Connect the Recorder to the desired type of antenna or cable TV system as shown on page 12.

This Recorder is equipped with a frequency synthesized tuner capable of receiving up to 181 channels. These include VHF channels 2-13, UHF channels 14-69 and CATV channels 1-125.

1.Select the [Auto Channel Set] option.

2.Press B to move to the third level. [Start] icon is highlighted.

3.Press ENTER to begin the channel search. The tuner will automatically cycle through all available channels in the area and place them in the tuner’s memory.

Note:

After the Auto Channel Set proceeding is complete, make sure the Tuning Band is set appropriately (TV or CATV) on tuning band, follow steps 1~2 as shown previous (Tuning Band Select) to choose the correct Tuning Band (TV or CATV).

To Add or Erase Channels

This feature allows you to add to or erase channels from memory manually.

1.Select the [CH. Add/Del] option.

2.Press B to move to the third level. [Edit] icon is highlighted.

3.Press ENTER and the Channel Edit menu appears.

4.Use v / V or number buttons to select a channel then press B.

5.If you want to obtain a clearer picture, tune the [MFT] option using v / V then press B.

[Add] or [Delete] icon is highlighted.

6.Press ENTER to confirm your setting.

7.Repeat steps 4-6 to add or erase additional channels.

8.Press HOME or RETURN (O) to exit the menu.

18