Initial Setup Wizard

After the POWER is pressed for the first time to turn on the unit, the Initial Setup Wizard function sets the Language, Channels and Clock step-by-step until the setup is complete.

1.Use v / V to select a language for the Setup menu and information display then press ENTER.

2.Check your antenna connections. Press B to move next step.

3.Select the [Tuning Band] option then press B . TV is for over-the-air antenna reception. CATV is for cable subscribers.

4. Press ENTER to begin the channel search.

You can skip the analog channel scanning by pressing B.

5.Enter the necessary information for date, year and time.

b / B (left/right): Moves the cursor to the previous or next column.

v / V (up/down): Changes the setting at the current cursor position.

Press ENTER to confirm your setting.

6. Press ENTER to exit the menu.

Note:

You can reset the Initial Setup Wizard from the [Factory Set] in the setup menu. (see page 21).

HOOKUP AND SETTINGS

19

Page 19
Image 19
LG Electronics DR787T owner manual Initial Setup Wizard