Symptom

 

 

Cause

Correction

 

 

 

 

 

 

 

 

 

 

 

 

 

The Recorder does

not

No disc is inserted.

Insert a disc. (Check that the disc indi-

 

 

 

 

start playback.

 

 

 

cator in the display window is lit.)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

An unplayable disc is inserted.

Insert a playable disc. (Check the disc

 

 

 

 

 

 

 

 

type and Regional code.)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

The disc is placed upside down.

Place the disc with the playback side

 

 

 

 

 

 

 

 

down.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

The disc is not placed within the

Place the disc on the disc tray correctly

 

 

 

 

 

 

 

guide.

inside the guide.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

The disc is dirty.

Clean the disc.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

The Rating level is set.

Cancel the Rating function or change

 

 

 

 

 

 

 

 

the rating level.

 

 

 

 

 

 

 

 

 

 

 

 

 

The Remote Control

 

 

There is an obstacle in the path of the

Remove the obstacle.

 

 

 

 

does not work properly.

Remote Control and this unit.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

The batteries in the Remote Control

Replace the batteries with new ones.

 

 

 

 

 

 

 

are exhausted.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

The Remote Control is not pointed at

Point the Remote Control at the remote

 

 

 

 

 

 

 

the remote sensor of the Recorder.

sensor of the Recorder.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

The Remote Control is too far from

Operate the Remote Control within

 

 

 

 

 

 

 

the Recorder.

23ft (7m).

 

 

 

 

 

 

 

 

 

 

 

 

Camcorder image is

Camcorder is off.

Turn camcorder on and operate

 

 

 

 

not shown.

 

properly.

 

 

 

 

 

 

 

 

 

 

 

 

Camcorder image via

The recorder’s source is incorrect.

Use INPUT to select input channel

 

 

 

 

A/V input or DV IN to

 

(AV1, AV2 or DV IN).

 

 

 

 

Recorder is not shown

 

 

 

 

 

 

on TV screen.

 

 

 

 

 

 

Timer recording is not

Clock in record is not set to

Set clock to correct time.

 

 

 

 

possible.

correct time.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Timer has been programmed

Reprogram Timer.

 

 

 

 

 

 

 

incorrectly.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

(TIMER Record) indicator light does

Reprogram Timer and turn the

 

 

 

 

 

 

 

not appear after programming timer.

Recorder off to enable timer.

 

 

 

 

 

 

 

 

 

 

 

54

Page 54
Image 54
LG Electronics DR787T owner manual Recorder does