LG Electronics LDG3015ST Cooktop Surface, Stainless Steel Surfaces, Control Panel, Oven air vents

Models: LDG3015SB LDG3015SW LDG3015ST LDG3016ST

1 47
Download 47 pages 42.61 Kb
Page 37
Image 37
Cooktop Surface

Care and Cleaning 37

Cooktop Surface

To avoid burns, do not clean the cooktop surface until it has cooled. Foods with high acid or sugar content could cause a dull spot if allowed to set. Wash and rinse when the surface has cooled. For other spills such as oil/grease spattering, etc., wash with soap and water when the surface has cooled. Then rinse and polish with a dry cloth.

Stainless Steel Surfaces NOTE

Do not lift the cooktop surface. Lifting the cooktop surface can lead to damage and improper operation of the range.

Stainless Steel Surfaces

To inquire about purchasing stainless steel appliance cleaner or polish, or to find the location of a dealer nearest you, please call our toll-free customer service number:

1-800-243-0000 or visit our website at: us.lgservice.com

Control Panel NOTE

yy Do not use a steel wool pad; it will scratch the surface. yy To clean the stainless steel surface, use warm sudsy

water or a stainless steel cleaner or polish.

yy Always wipe in the direction of the metal surface finish.

Control Panel

To prevent activating the control panel during cleaning, un- plug the range. Clean up splatters with a damp cloth using a glass cleaner. Remove heavier soil with warm, soapy water. Do not use abrasives of any kind.

Front manifold panel and knobs

It is best to clean the manifold panel after each use of the oven. For cleaning, use a damp cloth and mild soapy water or a 50/50 solution of vinegar and water. For rinsing, use clean water and polish dry with a soft cloth.

Front manifold panel and knobs NOTE

yy Do not use abrasive cleansers, strong liquid cleaners, plastic scouring pads or oven cleaners on the manifold panel. Doing so will damage the finish.

yy Do not try to bend the knobs by pulling them up or down or by hanging a towel or other objects on them. This can damage the gas valve shaft.

yy The control knobs may be removed for easy cleaning. yy To clean the knobs, make sure that they are in the

“OFF” position and pull them straight off the stems. yy To replace the knobs, make sure the knob has the

“OFF” position centered at the top, and slide the knob directly onto the stem.

ENGLISH

Oven air vents

Air openings are located at the rear of the cooktop, at the top and bottom of the oven door, and at the bottom of the range.

Oven air vents NOTE

To prevent scratching, do not use abrasive cleaners on any of these materials.

Manual background NOTE

Do not block the vents and air openings of the range. They provide the air inlet and outlet that are necessary for the range to operate properly with correct combustion.

Page 37
Image 37
LG Electronics LDG3015ST Cooktop Surface, Stainless Steel Surfaces, Control Panel, Front manifold panel and knobs, English