MAINTENANCE
REMOVING & REPLACING THE LIFT-OFF OVEN DOOR
CAUTION
•Be careful when removing and lifting the door.
•DO NOT lift the door by the handle.
-The door is very heavy.
To replace the door:
Step. 1
Firmly grasp both sides of the door at the top.
Step. 2
With the door at the same angle as the removal position, seat the indentation of the hinge arm into the bottom edge of the hinge slot. The
notch in the hinge arm must be fully seated into
the bottom of the slot.
English
To remove the door:
Step. 1
Open the door fully.
Step. 2
Pull the hinge locks down toward the door frame to the unlocked position.
Lock
SlotUnlock
Hinge lock
Step. 3 |
|
Open the door fully. If | Hinge arm |
the door will not open |
|
fully, the indentation is |
|
not seated correctly in |
|
the bottom edge of the |
|
slot. |
|
Step. 4
Bottom edge of slot
Indentation
Español | Step. 3 | |
Firmly grasp both sides of the door at the top. about 5° | ||
| ||
| Step. 4 |
Close door to the door removal position, which is approximately 5 degrees.
Step. 5
Push the hinge locks up against the front frame of the oven cavity to the locked position.
Step. 5
Close the oven door.
Hinge arm
Hinge lock
Lift door up and out until the hinge arm is clear of the slot.
DOOR CARE INSTRUCTIONS
• Most oven doors contain glass that can break.
Read the following recommendations:
1.Do not close the oven door until all the oven racks are fully in place.
2.Do not hit the glass with pots, pans, or any other object.
3.Scratching, hitting, jarring or stressing the glass may weaken its structure causing an increased risk of breakage at a later time.
- 38 -