Disassembly of the parts (Indoor unit)
Warning :
Disconnect the unit from power supply before making any checks.
Be sure the power switch is set to “OFF”.
1. To remove the Grille from the Chassis.
- Push mark[ | ∆ | ] on the grille bottom then pull it down |
and remove 3 securing screws.
-Lift the both lower parts of panel front.
-After pull down this panel a bit, separate connecting wire with product.
2. To remove the Control Box.
- Before removing the control box, be sure to disconnect the wires from PWB.
- Pull the cover control out from the control box and disconnect other wires.
- Remove securing screws.
- Pull the control box out from the chassis carefully.
Panel Front | |
Connector | |
| |
| |
