RD6000
Making a Call
When you make a call, follow these simple steps:
1. Make sure the phone is turned on. If not, press
.
2.Enter the phone number, with area code (if needed).
3.Press 
. lf the phone is locked, enter the lock code.
Call Failed - indicates that the call did not go through.
Restricted - indicates outgoing calls are in restricted mode. You can only dial phone numbers saved in the Emergency or Phone Book list.
To turn off this function:
Menu -> 
Settings -> 
Security -> Enter
Lock Code 
Restrict
4.Press 
to make the call.
If
NOTE: The phone number and entry name appear on the display when you type in the speed dial number and hold the last digit.
Correcting Dialling Mistakes
If you make a mistake while dialling a number, press 
once to erase the last digit entered or hold down
for at least two seconds to delete all digits.
RD6000
Receiving Calls
1. When the phone rings or vibrates press 
to answer.
If you press 
or the side keys 
while the phone is ringing, the ringing or vibration is muted for that call.
2. Press 
or 
twice to end the call.
Using Vibrate, Silence All, and Lock Mode
Vibrate Mode (Quick)
Use the Vibrate Mode in public places.
1.When in the Standby Mode, activate the Vibrate
Mode quickly by pressing 
for 3 seconds.
When the Vibrate Mode is set, the key tones are silent, and the phone is set to vibrate.
When flip of the phone is closed, press and hold Voice Dial Key to enter into vibrate mode.
NOTE: The phone remains in Vibrate Mode even if you turn it off and back on.
NOTE: To cancel Vibrate Mode, press 
to switch into Silence All or Normal Mode.
BASIC FUNCTIONS
26 | 27 |
