Liebert GXT3-10000T220 NOTICE

Operation

4.2 Control Panel

The Control Panel’s LCD and buttons are used to initiate various UPS operations, tests and

commands and to view the status of the UPS.

By pressing the Menu Up or Menu Down and Enter keys , it is possible to scroll through the

various menus. For details, see 4.2.1 - Controls and Messages and Figure 11.

Figure 10 Control Panel

4.2.1 Controls and Messages

Lighted LEDs

• UPS ON—UPS is in normal, online operation

• BYPASS—Load is supplied by the utility via automatic bypass

• BATTERY—Load is supported by the battery

• FAULT—A problem has develop ed within the UPS

Flashing LED

When the BYPASS LED is flashing, the utility is out of tolerance.

NOTICE

Risk of loss of power to connected load. Can cause equipment damage.

Never switch the UPS Off or switch from Online to Bypass in this status, because the load

would no longer be supplied.

Enter keyEscape key

Menu Up key Menu Down key

LCD

UPS On

LED

Battery

LED

Fault

LED

Bypass

LED

Contents

Main Page TABLE OF CONTENTS FIGURES TABL ES IMPORTANT SAFETY INSTRUCTIONS SAVE THESE INSTRUCTIONS Page Leakage Current NOTICE Information for the Protection of the Environment 1.0 INTRODUCTION AND SYSTEM DESCRIPTION 1.1 Device Overview The following table provides an overview of the various versions of the device: Figure 2 Liebert GXT3-10000T220 front and rear views Table 1 Overview of UPS devices and batteries 2.0 UNPACKING THE UPS AND SITE PREPARATION 2.1 Inspection 2.2 Required Setup Equipment 2.3 Unpacking Storage 2.4 Environmental Conditions 2.5 Access to Area 2.6 Floor Loading 2.7 Inventory List 3.0 I 3.1 Electrical preparations 3.2 Suggested Cable Sizes 3.3 External Protection and Isolating Devices 3.4 External Electrical Connections L1 L2 GET X1 X2 3.5 Connecting Utility and Load 3.6 Terminal Blocks for UPS UPS Input ~ Output ~ BYP L1 L2 Bypass Input ~ X4X3 L1 L2 GET X1 X2 UPS Input ~ Output ~ BYP L1 L2 Bypass Input ~ X4X3 3.7 Connecting Power Cables 3.8 External Battery Cabinets 4.0 O 4.1 Block Diagram 4.2 Control Panel 4.2.1 Controls and Messages Lighted LEDs Flashing LED NOTICE Operation 14 Figure 11 Menu tree Table 3 Displayed textsystem block and main menu 4.2.2 Battery Setup Parameters 4.2.3 Warning Indicators Table 4 Battery setup parameters Table 5 Warning indicators Table 3 Displayed textsystem block and main menu (continued) 4.2.4 Fault Indicators 4.3 Initial UPS Startup Procedure 4.4 UPS Shutdown Procedure 4.5 Maintenance Bypass Procedure 4.6 Return from Maintenance Bypass 4.7 Maintenance Breaker, Off Position 4.8 Self-Tests 4.8.1 Lamp Test 4.8.2 Battery Test 5.0 M 5.1 Test, Replacement and Disposal of Batteries 5.2 Storage 5.3 Cleaning 6.0 C 6.1 Communication Interface Port 6.2 Dry Contact 6.2.1 Any Mode Shutdown (Low Battery Warning) (On-Battery Warning) 6.3 Liebert IntelliSlot Communication Cards 6.3.1 Liebert MultiLink 6.4 Remote Emergency Power Off REPO switch connection diagram 7.0 T 8.0 S Table 9 Lieb ert GXT3 specifications Table 10 Battery cabinet specifications Table 11 Typical battery run times for the Liebert GXT3-10000T230 9.0 PRODUCT WARRANTY REGISTRATION Ensuring The High Availability Of Mission-Critical Data And Applications.