CABLE TV HOOK-UP

Note to the CATV Installer:

This reminder is provided to call the CATV system installer’s attention to Article 820-40 of the NEC that provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building as close to the point of cable entry as practical.

Antenna Grounding According to the NEC

Antenna Grounding According to the National Electrical Code, ANSI/NFPA 70. 1. Antenna lead in wire

2. Antenna discharge unit (nec section 810-20) 3. Grounding conductors (nec section 810-21)

4. Ground clamp

5. Power service grounding electrode system (nec article 250, part h)

6. Ground clamp

7. Electric service equipment

NOTE: The TV aspect of the LCD Console can only receive a analog signal. Digital cable must be externally converted to an analog signal. A 75-ohm external antenna terminal for VHF/UHF (>43dBuV (@75ohm) or > 65.8dBm) TV signal input must be present before TV setup can occur.

Life Fitness is not responsible for the installation of CATV service or components required for the delivery of CATV service.

11

Page 12
Image 12
Life Fitness 95CE operation manual Antenna Grounding According to the NEC, Cable TV HOOK-UP