Life Fitness 95CE operation manual Lifepulsetm Digital Heart Rate Monitoring System

3.2HEART RATE MONITORING

THE LIFEPULSETM DIGITAL HEART RATE MONITORING SYSTEM

The patented Lifepulse system sensors are the built-in heart rate monitoring system on the Life Fitness Lifecycle Upright Bike. During a workout, grasp the sensors (A) that are set into the han- dlebars. For an accurate reading, use a comfortable grip. The console displays the heart rate after 10 to 40 seconds.

A

THE POLAR® TELEMETRY HEART RATE MONITORING CHEST STRAP

The Lifecycle Upright Bike is equipped with Polar telemetry, a heart rate monitoring system in which electrodes, pressed against the skin, transfer heart rate signals to the bike console. These elec- trodes are attached to a chest strap that the user wears during the workout. The chest strap is optional. To order it, call Life Fitness Customer Support Services. See Section 6.5, titled How to Obtain Product Service.

See the diagram below for correct positioning of the strap. The electrodes (A), which are the two grooved surfaces on the underside of the strap, must remain wet to transmit accurately the elec- trical impulses of the heart back to the receiver. Moisten the electrodes. Then, secure the strap as high under the chest muscles as possible. The strap should be snug, but comfortable enough to allow for normal breathing.

The transmitter strap delivers an optimal heart rate reading when the electrodes are in direct contact with skin. However, it also functions properly through a thin layer of wet clothing.

If it becomes necessary to re-moisten the chest strap electrodes, grasp the center of the strap, pull it away from the chest to expose the two electrodes, and moisten them.

A A

22