2. Specifications HAMMER STRENGTH MTS OWNER’S MANUAL
16. Radial Bearings
• Shall be pillow block bearing with basic radial load rating of over 2000 pounds. Pillow block
bearings allow shaft to self-align as well as rotate, which results in smooth and friction free
movement.
17. Adjustable Seat
• Seat adjusts in 3/8 “ increments. Total of 24 adjustments for a 9” adjustment range.
• New and easy lift and lock seat adjustment. No pull buttons.
18. Bolts
• All hardware shall be grade 5 or grade 8 steel. ½ “ bolts along with Nyloc nuts are used for frame
construction.
19. Upholstery
• A superior grade of Boltaflex or Naugahyde colorguard vinyl shall be used on all pads and wear
covers.
• All edges shall be stitched to eliminate any folds in the material that would limit durability.
20. Foam
• 3 and 4 pound EVA foam (deformation resistant) or equivalent shall be used on all machines.
Foam shall be glued to a support board and contour shall be shaped. Wood backing shall be set
with minimum 3/8”x20 T-nuts.
21. Hand Grips
• Shall be an extruded 60 durometer thermorubber compound that is non-absorbing, wear and tear
resistant, and exhibits good dry and wet frictional characteristics.
• The grips shall be retained to the machine through the use of aluminum collars thereby
eliminating the tendency of the grip to slide off the machine.
22. Instructional Placard
• Shall provide illustrations for proper use and muscles trained.
23. Equipment Anchoring
• Each machine shall be equipped with a provision for anchoring it to the floor.
24. Warranty
• A 10-year minimum warranty on structural frames (excluding surface finish), 5-years on pillow
block bearings, guide rods, pulleys and weight plates, 1 year on belt, and grips, and 90 days on
upholstery and any items not specified.
• Machines are
not warranted against rust. In order to protect your machines against rust, please
repair all chips and scratches, and be sure the workout environment is free of humidity. For
example, ensure that the equipment does not share the HVAC system with a swimming pool
area. For maximum protection, please utilize an extra coat of automotive quality finish wax and
wipe excessive sweat and liquids from the machines.
25. Liability Insurance
• Certificate of insurance available to the customer upon request.
2-3