Life Fitness MTS 2. GENERAL SPECIFICATIONS

2. GENERAL SPECIFICATIONS

1. Independent Movement Arms

• Movement arms are independent of one another to insure proportional results.

• Provides greater training variety such as training one arm at a time or alternating movements.

2. Dual Weight Stacks

• Each movement arm is connected to its own weight stack in order to preserve the integrity of the

independent arm action.

3. Iso-Lateral Technology

• Shall incorporate converging on pressing exercises and diverging movement on pulling exercises.

• Replicates the body’s natural movements and minimizes joint stress.

1. Frame Construction

• Frame shall be constructed of U.S. made mechanical quality steel purchased in mill run

quantities to assure the best consistency.

• Primarily, 1 ½ “x 3” and 1 ½ “ x 2” rectangular tubing with 11 gauge thickness (.120 wall).

• Frames to be bolted together for portability and space-efficient shipment.

• Bolt plate flanges are 3/8” thick.

2. Frame Finish

• Prior to applying finish, each part shall be sandblasted to prepare the surface for maximum

adhesion.

• The frames are coated with an electrostatic epoxy powder coat finish applied in a powder form

and then baked at 400° F (204° C.)

• To prevent frame and surface corrosion, wax equipment annually and keep away from salt,

chlorine and all other harmful chemicals.

3. Weight Selection

• Weights are to be selected by using a 7/16” selector pin, which completely penetrates the weight

plate and is held in place with a magnet to eliminate any chance of disengaging during use.

• The selector pin shall be connected to the top weight to eliminate loss or substitution of

substandard pins.

2-1