4-1
4. MAINTENANCE PROCEDURES
ACTION DAILY WEEKLY MONTHLY QUARTERLY BI-ANNUALLY YEARLY AS NEEDED
CLEAN
Upholstery X
Guide Rods X
Linear Rods X
Shields X
Hand Grips X
INSPECT
Belts X
Hardware X
Frame X
Hand Grips X
LUBRICATE
Linear Bearing
Guide Rods X

CLEAN

● Upholstery with a mild soap and water.
● Guide and linear rods with a cotton cloth.
● Hand grips with mild soap and water.

INSPECT

● Belts should be inspected for wear or damage. Pay close attention at bends a nd attachments points.
● Hardware should be checked for looseness. Tighten as required.
● Frames should be inspected for wear or damage.
● Hand grips should be checked for wear or damage.

ONCE A DAY

● Wipe down upholstery with a mild soap and water or comparable all purpos e cleaner.
● Visually inspect belts for wear at and around connections and along en tire length of belt. Always replace at
first sign of wear.

ONCE A WEEK

● Visually inspect all hardware for loosening, tampering or wear.
● Check bolts on both ends of belt for tightness.
● Check condition of hand grips.
● Check belts for stretch and adjust as necessary by loosening the bolts on t he arms and pulling belt through.
The belts should be adjusted so that there is no slack with the top weig ht plate resting on the weight stack.
Make sure the weight pin goes in all holes easily. Tighten the bolts to com plete the adjustment.

NOTES

● Use polishing compound (such as car wax) to clean and remove shoe scuf fs from powdercoated surfaces
as necessary.