3. Pro Series Machines

SEATED LEG CURL (SL40)

Start Position

End Position

Muscle exercised: Hamstrings.

Setup: Select desired weight. Sit down on seat and adjust the back pad by pulling the knob under the left side of the seat. The seat should be adjusted so that the knee lines up with the pivot point (the red dot). Adjust the ankle pad so it’s positioned just under the ankles. Sit down with legs on top of the ankle pad. Lower the thigh pad until it’s comfortable. Keep back straight and head up.

Performing the exercise: Hold the thigh pad handles. Curl the pad down and back slowly. Hold the pad at the back position for a moment. Slowly let the pad out. Raise the thigh pad to get off of the machine.

Using the range limiter (SL35): If the machine is equipped with a range limiter, you may adjust the range of motion and starting pad location. Set the desired pad location by using the number coded pull knob. Set the desired range of motion by using the letter coded pull knob.

3-23

Page 32
Image 32
Life Fitness Pro Series owner manual Seated LEG Curl SL40