STEP 2

Apply Sample.

 

Obtain a drop of blood from your finger

using the PENLET II Automatic Blood

Sampler. When the

symbol appears on

the display, touch a small drop of blood to

the white target area of the test strip. Hold

your finger against the test strip until the

meter begins to count down. (If you do not apply a blood sample within two min- utes, the meter will turn itself off. You must remove the test strip and insert it back into the meter to restart the test.)

STEP 3

Accurate Results in Just 15 Seconds.

Your blood glucose test result will appear after the meter counts down from “15” to “1” second. Blood glucose test results are automatically stored in the meter memory. Turn the meter off by removing the test

strip.

(Example)

Record all test results in the Record book.

This helps you keep track of test results.

19

Page 29
Image 29
Lifescan Blood Glucose Monitor System manual Apply Sample, Accurate Results in Just 15 Seconds