Lightwave Communications LDT-5525 manual Safety Symbols, Safety Marking Symbols

SAFETY SYMBOLS

SAFETY SYMBOLS

This section describes the safety symbols and classifications.

Technical specifications including electrical ratings and weight are included within the manual. See the Table of Contents to locate the specifications and other product information. The following classifications are standard across all ILX Lightwave products:

•Indoor use only

•Ordinary Protection: This product is NOT protected against the harmful ingress of moisture.

•Class I Equipment (grounded type)

•Mains supply voltage fluctuations are not to exceed ±10% of the nominal supply voltage.

•Pollution Degree II

•Installation (overvoltage) Category II for transient overvoltages

•Maximum Relative Humidity: <80% RH, non-condensing

•Operating temperature range of 0 °C to 40 °C

•Storage and transportation temperature of –40 °C to 70 °C

•Maximum altitude: 3000 m (9843 ft.)

•This equipment is suitable for continuous operation.

Safety Marking Symbols

This section provides a description of the safety marking symbols that appear on the instrument. These symbols provide information about potentially dangerous situations which can result in death, injury, or damage to the instrument and other components.

Caution,	Earth	Alternating	Visible and/or
refer to	ground	current	invisible laser
manual	Terminal		radiation
Caution, risk	Protective	Caution, hot	Frame or
of electric	Conductor	surface	chassis
shock	Terminal		Terminal
On: In position of a bistable push control.		Off: Out position of a bistable push control.
The slash (I) only denotes that mains are on.		The circle (O) only denotes that mains are off.
or		or
(I)
		(O)

viiiLDT-5525