D-3

MAINTENANCE

D-3

 

Return to Master TOC

LINER REMOVAL AND REPLACE- MENT

NOTE: Changing the liner for a different wire size requires replacement of the gas diffuser per Table D.1 to properly secure the different liner.

TABLE D.1

7.Screw the gas diffuser onto the end of the gun tube and securely tighten. Be sure the gas diffuser is cor- rect for the liner being used. (See table and diffuser stencil.)

8.Tighten the set screw in the side of the gas diffuser against the cable liner using a 5/64" (2.0 mm) Allen wrench.

Return to Section TOC

Return to Section TOC

Return to Section TOC

Return to Section TOC

Return to Master TOC

Return to Master TOC

Return to Master TOC

 

 

 

Fixed

Adjustable

 

 

 

Nozzle

Nozzle

 

Replacement

Size Stencilled

Gas Diffuser

Gas Diffuser

Diameter of

Liner Part

on End of

Part No.

Part No.

Electrodes Used

Number

Liner Bushing

(and Stencil)

and Stencil)

 

 

 

 

 

 

.025-.030" Steel

KP1934-2

.030 (0.8 mm)

KP2026-3

KP2026-2

(0.6-0.8 mm)

 

 

 

 

 

 

 

 

 

 

 

.035-.045" Steel

KP1934-1

.045 (1.2 mm)

KP2026-3

KP2026-2

(0.9-1.2 mm)

 

 

 

 

 

 

 

 

 

 

3/64" Aluminum

KP1955-1

3/64" (1.2 mm)

KP2026-3

KP2026-2

(1.2 mm)

 

 

 

 

 

LINER REMOVAL, INSTALLATION AND TRIMMING INSTRUCTIONS FOR

MAGNUM 250L

NOTE: The variation in cable lengths prevents the interchangeability of liners between guns. Once a liner has been cut for a particular gun, it should not be installed in another gun unless it can meet the liner cutoff length requirement. Liners are shipped with the jacket of the liner extended the proper amount.

1.Remove the gas nozzle and nozzle insulator, if used, to locate the set screw in the gas diffuser which is used to hold the old liner in place. Loosen the set screw with a 5/64" (2.0 mm) Allen wrench.

2.Remove the gas diffuser from the gun tube.

3.Lay the gun and cable out straight on a flat surface. Loosen the set screw located in the brass connec- tor at the feeder end of the cable and pull the liner out of the cable.

4.Insert a new untrimmed liner into the connector end of the cable. Be sure the liner bushing is stencilled appropriately for the wire size bing used.

5.Fully seat the liner bushing into the connector. tight- en the set screw on the brass cable connector. the gas diffuser, at this time, should not be installed onto the end of the gun tube.

6.With the gas diffuser still removed from the gun tube, be sure the cable is straight, and then trim the liner to the length shown in Figure D.1. Remove any burrs from the end of the liner.

FIGURE D.1

SET SCREW

BRASS CABLE CONNECTOR

1-1/4"

(31.8mm)

LINER

TRIM

LENGTH

SET SCREW

GAS DIFFUSER

NOZZLE INSULATOR (IF USED)

GAS NOZZLE

CAUTION

This screw should only be gently tightened. Overtightening will split or collapse the liner and cause poor wire feeding.

Power MIG® 215XT

Page 28 Page 30
Page 29
Image 29
Lincoln Electric 11521 service manual Liner Removal and REPLACE- Ment, Table D.1
Page 28 Page 30

11521 specifications

The Lincoln Electric 11521 is a highly regarded choice among welders and metal fabricators, known for its reliability and efficiency. This portable MIG welder excels in delivering professional-grade results, making it suitable for both beginners and experienced welders. One of the standout features of the Lincoln Electric 11521 is its user-friendly design, which facilitates ease of use and enhances the overall welding experience.

Equipped with a powerful 180 amp output, the Lincoln Electric 11521 is capable of tackling a wide range of welding applications. It operates on a standard 230-volt outlet, allowing users to work on various materials, including mild steel, stainless steel, and aluminum, with thicknesses up to 5/16 inch. This versatility is crucial for those who handle different types of projects, from automotive repairs to home improvement tasks.

The welder employs a spool gun for welding aluminum, ensuring a smooth and efficient feeding of the wire. This technology mitigates the problems commonly associated with feeding aluminum wire through a regular gun, providing a seamless experience. Additionally, the Lincoln Electric 11521 features an adjustable welding speed and voltage, enabling users to fine-tune their settings to match the specific requirements of each project. This adaptability leads to better penetration, bead shape, and overall weld quality.

Another important aspect of the Lincoln Electric 11521 is its durability. Constructed with high-quality materials, this welder is designed for tough jobs and can withstand the wear and tear associated with heavy use. The unit's compact size and lightweight design further enhance its practicality, making it easy to transport between job sites or store when not in use.

Safety is a crucial element in welding, and the Lincoln Electric 11521 does not compromise on this aspect. It features a thermal overload protection system, which prevents damage to the machine by shutting it down in case of overheating. The welder also includes a gas-saving mode that intelligently reduces the gas flow during idle times, maximizing efficiency.

In summary, the Lincoln Electric 11521 is a versatile and reliable MIG welder that caters to a wide range of welding needs. With its powerful output, user-friendly features, advanced technologies, and robust safety mechanisms, it is an excellent investment for professionals and hobbyists alike looking to achieve high-quality welds with ease.
Top Page Image Contents