MAINTENANCED-3
GUN HANDLE
DISASSEMBLY
The internal parts of the gun handle may be inspected or serviced if necessary.
The gun handle consists of two halves that are held together with a collar on each end. To open up the handle, turn the collars approximately 60 degrees counterclockwise (the same direction as removing a right hand thread) until the collar reaches a stop. Then pull the collar off the gun handle. If the collars are difficult to turn, position the gun handle against a corner, place a screwdriv- er against the tab on the collar and give the screwdriver a sharp blow to turn the collar past an internal locking rib.
MAGNUM 250SP GUN PARTS AND ACCESSORIES
Description | Part Number | English Size | Metric Size | |
|
|
|
|
|
CABLE LINER |
|
|
|
|
For 15' (4.5 m) or shorter |
| |||
Cable | * | |||
| ❏ | 3/64" | 1.2 mm | |
|
|
| (Alum. wire) | (Alum. wire) |
|
|
|
|
|
CONTACT TIPS |
|
|
|
|
Standard Duty |
| .025" | 0.6 mm | |
|
| .030" | 0.8 mm | |
| * | .035" | 0.9 mm | |
| * | .045" | 1.2 mm | |
Heavy Duty |
| .035" | 0.9 mm | |
|
| .045" | 1.2 mm | |
Tapered |
| .025" | 0.6 mm | |
|
| .030" | 0.8 mm | |
|
| .035" | 0.9 mm | |
|
| .045" | 1.2 mm | |
Tab (For Aluminum) | ❏ | 3/64 (Alum Wire) | 1.2 mm | |
GAS NOZZLES |
|
|
|
|
Fixed (Flush) |
| 3/8" | 9.5 mm | |
| * | 1/2" | 12.7 mm | |
|
| 5/8" | 15.9 mm | |
Fixed (Recessed) |
| 3/8" | 9.5 mm | |
|
| 1/2" | 12.7 mm | |
Requires: |
| 5/8" | 15.9 mm | |
|
|
|
| |
Gas Diffuser As’bly |
| |||
Adjustable |
| 1/2" | 12.7 mm | |
Requires: |
|
|
|
|
Nozzle Insulator As’bly |
|
|
| |
Requires: |
|
|
|
|
Gas Diffuser As’bly |
| |||
|
| |||
Gasless Nozzle (For | M16938 | Δ |
|
|
Innershield) |
|
|
|
|
|
|
|
|
|
GUN TUBE ASSEMBLIES |
|
|
|
|
Standard (60°) | S18920 | * |
|
|
45° | S19890 | ❏ |
|
|
|
|
|
|
|
*Included with Idealarc
❏Included with
5356 alloy aluminum wire is recommended to alleviate potential soft wire feed- ing problems with
ΔRequires
