C-2

C-2

ACCESSORIES

Return to Section TOC

Return to Section TOC

to Section TOC

Return to Master TOC

Return to Master TOC

to Master TOC

OPTIONS/ACCESSORIES

The following options/accessories are available for your Classic II from your local Lincoln Distributor.

Undercarriage - Under 10 MPH (K768) - For in-plant or yard towing of the Classic II. Not intended for high- way towing.

Undercarriage (K913-1) - Two-wheeled undercarriage for in-plant and yard towing. Includes fender and light kit; three optional hitch choices. For highway use, con- sult applicable federal, state, and local laws.

Power Plug Kit (K802-C) - Provides four 20 amp, 115 volt plugs and one 50 amp, dual voltage (115/230V), full kVA plug. NOTE: For CSA machines and machines with GFCI receptacles, use Power Plug Kit K802-R.)

Power Plug Kit (K802-D) - Provides four 15 amp, 115 volt plugs and one 50 amp, dual voltage (115/230V), full kVA plug. (For non-CSA machines.)

CV Adapter - Below Code 10050 - (K384) - Provides constant voltage output for semiautomatic welding.

Ether Start Kit (K887-1) - Automatic ether start kit pro- vides cold weather starting assistance in temperatures below 10oF (-12.2oC). Requires an ether tank that must be purchased locally.

NOTE: Ether starting can contribute to shortened engine life. Avoid unnecessary or indiscriminate use.

Linc Thaw™ Control Unit (L2964-5) - Includes meter and fuses to protect the welder when thawing frozen water pipes.

Wire Feed Module - Above Code 10050 (K623-1) -

Provides constant voltage output for semiautomatic welding. Includes remote for CV mode and internal “Cold Tip Contactor” for the LN-7 and LN-23P.

Accessory Kit (K703) - Includes the following:

•Thirty-five feet (10.5 meters) of #2 AWG electrode cable

•Thirty feet (9.1 meters) of #2 AWG work cable

•Headshield with No. 12 filter.

•GC300 work clamp

•Cooltong™ 300 insulated electrode holder

The cables are rated at 250 amps, 40% duty cycle.

Spark Arrester Kit (K899-1) - A field-installed kit for the Classic II diesel engine muffler exhaust pipe. Includes a heavy-gauge steel, approved spark arrester, mounting clamp and adapter.

Remote Control - 100 Feet, Below Code 10050 - (K888-2) - Includes a control box with 100 ft. (7.5 meters) of 4-conductor cable. Allows output to be con- trolled remotely.

Remote Control Kit - Above Code 10050 - (K924-1) - Includes a control box with 100 ft. (7.5 meters) of 4- conductor cable. Allows output to be controlled remotely.

GFCI Receptacle Kit (K896-2) - Includes a UL approved 115 volt ground fault circuit interrupter recep- tacle (duplex type) with covers and installation instruc- tions. Each half of the receptacle is rated 15 amps, but the maximum total current from the GFCI duplex is lim- ited to 20 amps. The GFCI receptacle replaces the factory installed 115 volt duplex receptacle.

Return

Return to Section TOC

Return

Return to Master TOC

WARNING

PIPE THAWING can result in fire, explosion, damage to pipes, wiring, and the welder as well as other unsafe or hazardous conditions. Do not use a welder to thaw pipes before reviewing Lincoln Bulletin E695.1 (dated October 1987 or later).

CLASSIC II

Page 29 Page 31
Page 30
Image 30
Lincoln Electric SVM125-A service manual Options/Accessories, Accessory Kit K703 Includes the following
Page 29 Page 31

SVM125-A specifications

The Lincoln Electric SVM125-A is a versatile and highly efficient welding machine that has gained significant recognition in the welding industry. Designed for both professionals and enthusiasts, this machine combines advanced technology with user-friendly features to deliver outstanding performance in a range of welding applications.

One of the standout features of the SVM125-A is its Inverter Technology. This cutting-edge technology allows for lightweight and compact design, making the machine highly portable. The inverter technology also provides a steady arc, which is crucial for achieving clean, high-quality welds. With a duty cycle of 125 amps at a 60% duty cycle, this welding machine can handle a variety of materials and thicknesses, from thin sheet metal to heavier structural components.

The SVM125-A supports multiple welding processes, including MIG, stick, and TIG welding. This versatility makes it an ideal choice for diverse welding tasks, whether you're working in a fabrication shop, doing repair work, or engaged in hobbyist projects. The machine features easy switch functionality, allowing users to quickly shift between welding processes without complicated setup.

Another notable characteristic is the machine's user-friendly interface. The intuitive control panel includes clear indicators and knobs that allow for easy adjustments of voltage and wire feed speed. This design is especially helpful for novice welders, providing them with the confidence to make adjustments as needed and ensuring optimal weld quality.

Safety is also a priority with the SVM125-A. The machine is equipped with thermal overload protection, which automatically shuts it down in case of overheating, preventing damage to the unit and ensuring operator safety. Additionally, the machine features a robust construction that emphasizes durability, making it suitable for demanding work environments.

Portability is enhanced through its lightweight design, and the built-in carrying handle makes it easy to transport from one job site to another. The SVM125-A is also compatible with a variety of welding accessories, further increasing its adaptability and functionality.

In conclusion, the Lincoln Electric SVM125-A stands out as a well-rounded welding machine that integrates advanced technology with user-friendly features. Its versatility in welding processes, robust design, and emphasis on safety and usability make it a valuable tool for welders at all skill levels. Whether for professional use or personal projects, the SVM125-A is a reliable choice that delivers exceptional performance and quality.
Top Page Image Contents