![](/images/new-backgrounds/1327852/32785259x1.webp)
|
| LEARNING TO WELD |
| ||
|
|
|
|
|
|
Proper Gun Handling
Most feeding problems are caused by improper han- dling of the gun cable or electrodes.
1.Do not kink or pull the gun around sharp corners
2.Keep the gun cable as straight as practical when welding.
3.Do not allow dolly wheels or trucks to run over the cables.
4.Keep the cable clean.
5.Innershield electrode has proper surface lubrica- tion. Use only clean,
6.Replace contact tip when it becomes worn or the end is fused or deformed.
SP