Innershield Fcaw Conversion | Lincoln Electric UWW-170 specs

C-2		ACCESSORIES		C-2

INNERSHIELD (FCAW)

CONVERSION

Several changes are needed to convert the unit for operation with the Innershield (FCAW) process. The following conversions should be reviewed before welding with (FCAW):

1.Change the output polarity to DC(–). See “Work Cable Installation” in Installation section for details.

2.Install proper drive roll for the wire size selected. See “Changing Drive Roll” in Maintenance section for details.

3.Install the proper gun liner and tip for the wire size selected. See “Component Replacement” in Maintenance section for details.

4.Remove gas nozzle (if installed) and install gasless nozzle.

5.Load wire into machine and thread into gun and cable per “Welding Wire Loading” section.

REPLACEMENT PARTS

Complete Gun and Cable Assembly (Code 10488 and 10489 only)

L10738

Complete Gun and Cable Assembly (Code 10490 and above only)

L10744

Contact Tip .025” (0.6 mm)

S18704-1

Contact Tip .030” (0.8 mm)

S18704-2

Contact Tip .035” (0.9 mm)

S18704-3

Contact Tip .045” (1.2 mm)

S18704-13

Liner .023 - .030” (0.6 - 0.8 mm)

S18704-4 (Color coded Orange)

Liner .035/.045” (0.9/1.2 mm)

S18704-5 (Color coded Green)

Liner for Aluminum .040 (1.0 mm)

S18704-17 (Color coded Black)

Gas Diffuser

S18704-6

Gas Nozzle

S18704-7

Gasless Nozzle (Innershield Only)

S18704-14

SP 170-I

Image 33

Lincoln Electric UWW-170 manual Innershield Fcaw Conversion, Replacement Parts

Contents

SP 170-I and UWW-170 California Proposition 65 Warnings Safety Electric Shock can kill Iii Welding Sparks can cause fire or explosion Sûreté Pour Soudage a L’Arc Précautions DE Sûreté Please Examine Carton and Equipment For Damage Immediately Thank You Table of Contents Installation Safety Precautions 2INSTALLATIONA-2Identify and Locate Components Electric Shock can kill Limitations Select Suitable LocationOutput Connections Stacking Work Cable Installation GUN InstallationConnecting Gun Cable to the SP GAS Connection Input Connections Power Input Cable 230 50/60 Line Cord Connection Operational Features and Controls Design Features AdvantagesOperation General Description Welding Capability Controls and Settings Friction Brake Adjustment Wire LoadingWelding Operations Sequence of Operation Figure B.4 Cleaning Tip And Nozzle Process GuidelinesMaking a Weld Changing Machine Over to Feed Other Wire Sizes Welding with Gmaw MIGOverload Protection Learning to Weld Learning to WeldARC-WELDING Circuit SELF-SHIELDED Fcaw Welding ARC Gmaw MIG Welding ARC Process SelectionFor Gmaw MIG Process Joint Types and Positions Common MetalsFor Fcaw Innershield Process Butt Welds Welding In The Vertical Position PenetrationFillet Welds Welding Techniques for the SELF- Shielded Fcaw Process Machine SET UP for the SELF-SHIELDED Fcaw ProcessVertical-down Welding Correct Welding Position Correct Welding Speed Correct Electrical Stickout ESO Practice Helpful Hints Welding Techniques for the Gmaw MIG Process Machine SET UP for the Gmaw MIG Process For the SP 170-I, use the following To Eliminate a Ropy Convex Bead in order of importance Troubleshooting WeldsTo Correct Poor Penetration in order of impor- tance To Eliminate Stubbing* in order of importance Proper Gun Handling Application Chart Output PolarityDrive Roll Orientation Optional Accessories AccessoriesK464 .035 0.9 mm Innershield Welding Kit K491 .045 1.2 mm Innershield Welding Kit Innershield Fcaw Conversion Replacement Parts Maintenance Maintenance Safety PrecautionsRoutine Maintenance Configuration of Components in Wire Feeding System GUN and Cable MaintenanceGun Cable Cleaning Contact Tip Cable Liner Drive Roll Component Replacement Procedures Changing Drive Roll SP 170-I onlyChanging Drive Roll UWW-170 only Fully seat the liner bushing into the con Changing Liner GUN Handle Parts red trigger GUN Handle Parts black trigger HOW to USE Troubleshooting Guide Troubleshooting Recommended Course of Action Problems Possible Areas Symptoms Misadjustments GAS Flow Problems Welding Problems Wiring WiringPage New Lessons in Arc Welding How To Read Shop DrawingsNeed Welding Training? $700.00 Precaucion Warnung