Lincoln Electric UWW-170 manual Optional Accessories, K464 .035 0.9 mm Innershield Welding Kit

C-1 ACCESSORIES C-1

OPTIONAL ACCESSORIES

See Maintenance section for instructions on installing drive roll, cable liner, contact tip and their proper configuration.

1.KP665-045C Drive Roll – Optional — Knurled drive roll for feeding .035 - .045” (0.9 - 1.2 mm) diameter flux-cored electrode.

2.K695-1 Spot / Stitch Timer Kit — Includes spot timer to control the spot welding arc time, and a stitch timer to control the on/off cycle time of the arc to prevent burnthrough on thin gauge metals. Also includes spot welding nozzle.

The Spot/Stitch Timer Kit installs inside the wire feed compartment, replacing the blank panel locat- ed below the gun trigger lead connectors, per the installation instructions (M17920) included with the kit.

3.K520 Utility Cart — Designed to transport the Lincoln family of small welders. Has provisions for mounting a single gas cylinder. Has front casters and large rear wheels. Handle height is easily adjustable. Bottom tray provided for tools and accessories. Easy assembly required; takes less than 15 minutes.

4.K464 .035" (0.9 mm) Innershield® Welding Kit

— Includes a contact tip, a gasless nozzle and a

.035/.045" (0.9/1.2 mm) cable liner to permit the gun and cable to use .035" (0.9 mm) diameter flux- cored electrode. The fitting on the end of the liner is stenciled with the maximum rated wire size (.045"/1.2 mm). Also included is a 10 lb.(4.5 kg.) spool of .035" (0.9 mm) Innershield® NR-211-MP.

For use with “Lincoln Electric®” gun (with black trigger). The end of the brass fitting on the end of the .035/.045” (0.9/1.2mm) liner is color coded green. (The .023-.030” (0.6-0.8mm) liner is color coded orange).

See “Innershield (FCAW) Conversion” in this sec- tion for installation instructions and MAINTE- NANCE section for proper feeding component con- figuration and installation.

5.K491 .045" (1.2 mm) Innershield® Welding Kit

— Includes a contact tip, a gasless nozzle and a

.035/.045" (0.9/1.2 mm) cable liner to permit the gun and cable to use .045" (1.2 mm) diameter flux- cored electrode. The fitting on the end of the liner is stenciled with the maximum rated wire size (.045"/1.2 mm). Also included is a 10 lb.(4.5 kg.) spool of .045" (1.2 mm) Innershield® NR-211-MP and a knurled drive roll for .035” (0.9mm) and .045” (1.2mm) wire.

For use with “Lincoln Electric®” gun (with black trigger). The end of the brass fitting on the end of the .035/.045” (0.9/1.2mm) liner is color coded green. (The .023-.030” (0.6-0.8mm) liner is color coded orange).

See “Innershield (FCAW) Conversion” in this sec- tion for installation instructions and MAINTE- NANCE section for proper feeding component con- figuration and installation.

SP-170-I