STANDARD PROGRAMMING METHOD
System Options (Continued)
Welcome Display Text
The
✦NOTE: This step cannot be performed remotely through the telephone.
1. Press
✦NOTE: To enter capital letters only, press fi rst before entering the text.
2.Enter the new text for the top line of the display (up to 16 characters).
3.Press
✦NOTE: To enter capital letters only, press fi rst before entering the text.
4.Enter the new text for the bottom line of the display (up to 16 characters).
5.Press
WELCOME DISPLAY TEXT | PPN 57 |
57#LINE 1#LINE 2#
LINE 1 = UP TO 16 CHARACTERS TEXT
LINE 2 = UP TO 16 CHARACTERS TEXT
FACTORY SETTING: LINEAR ACCESS TELEPHONE ENTRYAutomatic Telephone Answer
The factory setting will allow the system to detect a ring signal on the | AUTOMATIC TELEPHONE ANSWER | PPN 61 | ||
telephone line and answer the call. | 61#ANSWER# |
| ||
✦ | programming, remote access control by residents, and resident |
| ||
NOTE: The automatic answer feature can be turned off, although remote |
|
| ||
| features will no longer function. | ANSWER = 0 FOR AUTO ANSWER OFF |
| |
1. | Press |
| ||
ANSWER = 1 FOR AUTO ANSWER ON |
| |||
2. | Select the option for automatic telephone answering: |
| ||
| • Enter 0 to turn OFF automatic telephone answering. | FACTORY SETTING: AUTO ANSWER ON |
| |
| • Enter 1 to turn ON automatic telephone answering. |
| ||
3. | Press |
|
| |
|
| |||
|
|
| ||
Speaker Chirp on Keystrokes |
|
| ||
SPEAKER CHIRP ON KEYSTROKE | PPN 62 | |||
The factory setting will cause the speaker to chirp when each key on the | ||||
keypad is pressed. Alternately, the speaker chirp can be turned off. | 62#CHIRP# |
| ||
1. | Press |
| ||
2. | Select the option for keystroke speaker chirps: |
|
| |
| • Enter 0 to turn OFF the keystroke speaker chirps. | CHIRP = 0 FOR KEYSTROKE CHIRP OFF |
| |
| • Enter 1 to turn ON the keystroke speaker chirps. | CHIRP = 1 FOR KEYSTROKE CHIRP ON |
| |
3. | Press |
| ||
|
| |||
|
| FACTORY SETTING: KEYSTROKE CHIRP ON |
| |
|
|
| ||
|
|
|
| |
Speaker Tone on Access Relay Activation |
|
| ||
SPEAKER TONE ON ACCESS RELAY ACTIVATION | PPN 63 | |||
The factory setting will cause the speaker to sound a tone for two seconds | ||||
when the access relay is activated. Alternately, the tone can be turned | 63#TONE# |
| ||
off. |
|
| ||
1. | Press |
|
| |
2. | Select the option for access relay activation tone: | TONE = 0 FOR ACCESS RELAY TONE OFF |
| |
| • Enter 0 to turn OFF the access relay activation tone. | TONE = 1 FOR ACCESS RELAY TONE ON |
| |
| • Enter 1 to turn ON the access relay activation tone. |
|
| |
3. | Press | FACTORY SETTING: RELAY TONE ON |
| |
|
|
| ||
|
|
|
|
10