Linear RE-1 manual Click on Close, Connect WINDOW, Select Properties

SETTING UP A WINDOWS VISTA™ DIAL-UP NETWORK CONNECTION (PART 2)

7. CLICK ON "CLOSE" 8. FROM THE START MENU, CLICK ON "CONNECT TO" AND SELECT "RE-1"

9. IN THE CONNECT WINDOW, SELECT "PROPERTIES" 10. CLICK ON "CONFIGURE" AND UN-CHECK ALL HARDWARE FEATURES

11.CLICK ON "OK" THEN CLICK ON "NETWORKING" TAB. HIGHLIGHT "INTERNET PROTOCOL VERSION 4 (TCP/IPv4)" AND CLICK ON "PROPERTIES"

12.CLICK ON "USE THE FOLLOWING IP ADDRESS" AND ENTER 192.168.20.11

13.CLICK ON "ADVANCED" AND UN-CHECK "USE IP HEADER COMPRESSION"

16