Linear RE-2 manual Setting UP a Windows XP DIAL-UP Network Connection

SETTING UP A WINDOWS XP™ DIAL-UP NETWORK CONNECTION

1.FROM CONTROL PANEL SELECT "NETWORK CONNECTIONS" THEN SELECT "NEW CONNECTION WIZARD"

4.NEW CONNECTION WIZARD - "GETTING READY" SELECT "SET UP MY CONNECTION MANUALLY"

7.NEW CONNECTION WIZARD - "PHONE NUMBER TO DIAL" FOR A REMOTE CONNECTION, ENTER THE PHONE NUMBER OF THE RE-2'S PHONE LINE. FOR A LOCAL CONNECTION ENTER "###" (THE DEFAULT LOCAL ACCESS PASSWORD)

NOTE: "###" IS THE DEFAULT FOR LOCAL PROGRAMMING ACCESS. IF IT HAS BEEN CHANGED, USE THE NEW CODE

2.THE NEW CONNECTION WIZARD WILL START CLICK "NEXT"

5.NEW CONNECTION WIZARD - "INTERNET CONNECTION" SELECT "CONNECT USING DIAL UP MODEM"

8. NEW CONNECTION WIZARD - "INTERNET ACCOUNT INFORMATION" ENTER "Linear" AS USER NAME AND "123456" AS PASSWORD

UN-CHECK THESE THREE BOXES

3.NEW CONNECTION WIZARD - "NETWORK CONNECTION TYPE" SELECT "CONNECT TO THE INTERNET" OPTION

6.NEW CONNECTION WIZARD - "CONNECTION NAME" ENTER "RE-2 LOCAL" FOR A LOCAL CONNECTION OR "RE-2 REMOTE" FOR A REMOTE CONNECTION AS THE "ISP NAME"

9.NEW CONNECTION WIZARD - "COMPLETING THE WIZARD" SELECT "ADD SHORTCUT" AND CLICK "FINISH"

12. SELECT "NETWORKING" TAB,

11. CLICK "PROPERTIES" TO SET OPTIONS THEN CLICK PROPERTIES FOR "INTERNET PROTOCOL (TCP/IP)

10.DOUBLE-CLICK ON DESKTOP ICON TO LAUNCH THE CONNECTION WINDOW

13.SELECT "USE THE FOLLOWING IP ADDRESS" AND ENTER

192.168.20.11 THEN CLICK "ADVANCED...".

14.UN-CHECK "USE DEFAULT GATEWAY ON REMOTE NETWORK" AND UN-CHECK "USE IP HEADER COMPRESSION" THEN CLICK OK

BE SURE ONLY THESE FIRST TWO BOXES ARE CHECKED

13