Linear SLC, SLD, SLR manual Safety Edge Layout Illustration

SLR • SLC • SLD  Slide Gate Operator Installation

THIS DRAWING IS INTENDED TO DRAW ATTENTION TO POSSIBLE

LOCATIONS FOR THE INSTALLATION OF CONTACT OR NON-CONTACT

OBSTRUCTION SENSING DEVICES. OTHER AREAS OF ENTRAPMENT

MAY EXIST DEPENDING ON EACH SPECIFIC INSTALLATION.

SEE NOTE

ITEM #2

SEE NOTE

ITEM #4

FOR CLARITY, FENCE AND PEDESTRIAN GATE NOT SHOWN

REVERSING EDGE ASSY CLOSEUP

4

Safety Edge Layout Illustration

Guide

- 18 -

SEE NOTE ITEM #1

			2
	SEE NOTE
	ITEM #1
		ITEM	DESCRIPTION
		1	GATE (REFERENCE ONLY)
		2	EDGE
		3	EDGE EXTRUSION
	SLIDE GATE OPERATOR WITH	4	SPACERS (3)
SEE NOTE		5	8-32 X 1" SCREWS (3)
	RADIO RECEIVER MOUNTED INSIDE
ITEM #2		6	RETAINING BRACKET

NOTES:

3

#1

227968 Revision X13 2-3-09

SEE NOTE ITEM #3

SEE NOTE ITEM #1

1.WIRE THESE EDGES FOR CLOSE OBSTRUCTION

2.WIRE THESE EDGES FOR OPEN OBSTRUCTION

3.ON LEADING EDGE, WIRE FOR CLOSING OBSTRUCTION OR REVERSING IF DESIRED

4.ON TRAILING EDGE, WIRE FOR OPEN OBSTRUCTION

REFER TO ACCESSORY CONNECTIONS PAGES FOR DETAILS

5.IF SENSOR EDGES ARE HARD WIRED TO THE OPERATOR, CARE MUST BE TAKEN IN ROUTING THE WIRES SUCH THAT THEY DO NOT BECOME DAMAGED DURING NORMAL OPERATION (AVOID PINCHING AND ABRASION)

6

5

1