Linksys EtherFast® Series
Windows 95 Installation & Setup
Overview
After installing the EtherFast hardware in your computer, follow these instructions for installing the network driver. The installation procedure for the network driver will vary slightly depending on the version of Windows 95 you are using and your current system configuration. For troubleshooting tips during setup, refer to page 44.
There are different versions of Windows 95:
•Version A
•Version B (also known as OSR2)
The installation procedure for the network driver will vary slightly depending on which version of Windows 95 you are using. To begin the driver installation, and to determine which version of Windows 95 you are using:
1. If you already haven’t, start up your PC.
2. Windows 95 will automatically detect the
EtherFast Card in your computer. If an Update Device Driver Wizard win- dow (below, or another similar window) appears, you are using Windows 95 version B. If not, you are using version A. Skip to page 51.
I
10/100 Network In a Box
Installing the Driver in Windows 95 Version B
1.While the Update Device Driver Wizard window is visible (previous page), put the EtherFast Card 10/100 LAN Card Driver Disk into your floppy drive and click Next.
2.Windows 95 will find the Linksys LNE100TX Fast Ethernet Adapter (LNE100TX v4) driver on the disk. If Windows fails to find the driver, see problem 2 on page 44. Click Finish.
3.Windows will begin copying the EtherFast Card’s driver files to your PC. Refer to the chart on the next page to help guide you through the process.
18 | 19 |
