Linksys FENSK05 v2 manual Contents for the 10/100 Network in a Box

Linksys EtherFast® Series

Contents for the 10/100 Network in a Box

10/100 Network In a Box

Getting to Know the EtherFast 10/100 Network In a Box

The EtherFast 10/100 LAN Card

You will install one EtherFast 10/100 LAN Card into each computer you wish to network.

• Two EtherFast 10/100 LAN Cards (version 4)
• Two Wake-on-LAN wires
•	One EtherFast 10/100 5-Port Workgroup Hub (version 2)
• Two Category 5 Network Cables
•	One 3.5” Driver Disk
•	Internet-Sharing Software

The Card’s LEDs
Link/Act	The Link LED will illuminate when the card has been suc-
	cessfully connected to a network and flicker when data is
	being transmitted or received over the network.

• One AC Adapter

• One User Guide

100The 100 LED will illuminate when the card is operating at 100Mbps. If the 100 LED is not illuminated and the PC is powered on, the card is operating at 10Mbps.

The Card’s RJ-45 Port

Note: Some 10/100 LAN Cards may have the 100 LED labeled Speed. The LEDs all operate as shown above, however, regardless of how they’re labeled.

The RJ-45 Port is where you will connect your network cabling. See page 66 for detailed information on cabling.

2 3