Linksys WRP400 manual Management

Chapter 3

Advanced Configuration

Administration > Management

Management

Router Access

To ensure the Router’s security, you will be asked for your password when you access the Router’s web-based utility. The default is admin.

Router Password  Enter a new password for the Router.

Re-enter to confirm  Enter the password again to confirm.

Web Access

Web Utility Access  HTTP (HyperText Transport Protocol) is the communications protocol used to connect to servers on the World Wide Web. HTTPS uses SSL (Secured Socket Layer) to encrypt data transmitted for higher security. Select HTTP or HTTPS. HTTP is the default.

Web Utility Access via Wireless  If you are using the Router in a public domain where you are giving wireless access to your guests, you can disable wireless access to the Router’s web-based utility. You will only be able to access the utility via a wired connection if you disable the setting. Keep the default, Enabled, to allow wireless access to the utility, or select Disabled to block wireless access to the utility.

Remote Access

Remote Management  To permit remote access of the Router, from outside the local network, select Enabled. Otherwise, keep the default, Disabled.

Web Utility Access  HTTP (HyperText Transport Protocol) is the communications protocol used to connect to servers on the World Wide Web. HTTPS uses SSL (Secured Socket Layer) to encrypt data transmitted for higher security. Select HTTP or HTTPS. HTTP is the default.

Remote Upgrade  If you want to be able to upgrade the Router remotely, from outside the local network, select Enabled. (You must have the Remote Management feature enabled as well.) Otherwise, keep the default, Disabled.

Allowed Remote IP Address  If you want to be able to access the Router from any external IP address, select Any IP Address. If you want to specify an external IP address or range of IP addresses, then select the second option and complete the fields provided.

Remote Management Port  Enter the port number that will be open to outside access.

NOTE: When you are in a remote location and wish to manage the Router, enter

http://<Internet_IP_address>:port or https://<Internet _ IP _ address>:port, depending on whether you use HTTP or HTTPS. Enter the Router’s specific Internet IP address in place of <Internet_IP_address>, and enter the Remote Management Port number in place of the word port.

UPnP

Universal Plug and Play (UPnP) allowsWindows XP andVista to automatically configure the Router for various Internet applications, such as gaming and videoconferencing.

UPnP  If you want to use UPnP, keep the default, Enabled. Otherwise, select Disabled.

Allow Users to Configure  Keep the default, Enabled, if you want to be able to make manual changes to the Router while using the UPnP feature. Otherwise, select Disabled.

Keep UPnP Configurations After System Reboot  If you enable the Allow Users to Configure option, then this option will be available. Select Enabled, if you want to keep UPnP configuration settings after the Router reboots. Otherwise, keep the default, Disabled.

Allow Users to Disable Internet Access  Select Enabled, if you want to be able to prohibit any and all Internet connections. Otherwise, keep the default, Disabled.

Multimedia Streaming

RTSP Support  If you are experience issues with video- on-demand applications, select Enabled to improve multimedia transmissions. Using this option, the Router will establish channels with the Real Time Streaming

Wireless-G Broadband Router with 2 Phone Ports 25