11 MICROPROCESSOR CONTROL
MSZ-A09NA MSZ-A17NA MSY-A15NA
MSZ-A12NA MSZ-A24NA MSY-A17NA
WIRELESS REMOTE CONTROLLER
These pictures show
Signal transmitting section
Operation display section
ON/OFF (operate/
stop) button
Temperature buttons
Indication of remote controller model is on back
VANE button (Horizontal vane button)
Operation select button
ECONO COOL button
WIDE VANE button (Vertical vane button)
POWERFUL button
RESET button
Fan speed control button
TIME set buttons
Forward button
Backward button
CLOCK set button
NOTE
Use the remote controller provided with the unit only. Do not use other remote controller.
(This diagram shows anoverall view.)
Once the operation mode is set, the same operation mode can be repeated by simply turning OPERATE/STOP (ON/OFF) button ON.
Indoor unit receives the signal with a beep tone.
When the system turns off,
INDOOR UNIT DISPLAY SECTION
Operation Indicator lamp
The operation indicator at the right side of the indoor unit indicates the operation state. •The following indication applies regardless of shape of shape of the indication.
|
| Difference between |
Indication | Operation state | target temperature |
|
| and room temperature |
|
|
|
| This shows that the air conditioner is |
|
| operating to reach the target temperature. | Approx. 4°F or more |
| Please wait until the target temperature is | |
|
| |
| obtained. |
|
|
|
|
| This shows that the room temperature is | Approx. 4°F or less |
| approaching the target temperature. | |
|
| |
|
|
|
| This shows a state of standby for operation. | — |
| (For multi system air conditioner) | |
|
| |
|
|
|
Lighted
Blinking
Not lighted
42