The example shows the MMSI Data 987776510 being entered.
To change or edit MMSI data, select a FL location and press the MEM key to change the data. After inputting the
DSC Monitor
To be sure the DSC Monitor mode is on, hold down the CALL key for 5 seconds to toggle the DSC Monitor mode off and on. It must be on for your radio to receive a DSC call. The DSC MON ANNUNCIATOR will be dis- played onscreen, if Ch. 70 is being accessed. Since there is no independ- ent Ch. 70 receiver, the radio normally monitors Ch. 70 and checks other channels on a regular basis to detect a squelch break. This method ensures the radio will acquire the most DSC calls possible.
21
