SAS2 Integrated RAID Solution User Guide
3.4 Other Configuration Tasks
3.4.1 Viewing Volume Properties
3.4.2 Running a Consistency Check
Chapter 3: Creating Mirrored Volumes Other Configuration Tasks
This section explains how to perform other configuration and maintenance tasks for mirrored volumes.
Follow these steps to view the RAID properties of the mirrored volume(s):
1.In the SAS2 BIOS CU, select an LSI SAS2 adapter from the Adapter List. The Adapter Properties window appears.
2.Select RAID Properties.
The Select New Array Type window appears.
3.Select View Existing Array.
The View Array window appears, showing information about the array and each disk in it. The window includes global hot spare information, if any exists.
NOTE: If you create one volume using SAS disks, another volume using SATA disks, and one or two global hot spare disks, the hot spare disks only appear when you view the mirrored volume that uses the same type of disks as the hot spare disks.
4.If the currently displayed array is not the one you want, press Alt + N to view another array on the adapter.
Use the Consistency Check command to verify that the data is synchronized on the mirrored disks in the volume.
Follow these steps to run a consistency check on a selected mirrored volume:
1.In the Adapter List window, use the arrow keys to select an LSI SAS adapter. The Adapter Properties window appears.
2.Use the arrow keys to select RAID Properties, and then press Enter. The Select New Array Type window appears.
3.Select View Existing Array.
The View Array window appears. If necessary, press Alt + N to switch to another array on this adapter.
4.Select Manage Array.
The Manage Array window appears.
5.Select Consistency Check on the Manage Array window. A menu window appears.
6.Press Y to start the consistency check.
The consistency check runs a
LSI Corporation Confidential August 2010 | Page 19 |
