Lucent Technologies 308/616 installation instructions Mount Jack Panel Boxes

■Mount Jack Panel Boxes

Mount the jack panel boxes near the controller, creating a “jack field.” You will need one jack panel box for every six telephones in your system. Ideally, the jack field will be two to six inches below the controller if the controller is wall-mounted.

Mounting screws for the jack panel boxes are included in the kit. If you are installing the boxes on a sturdy supporting structure, such as studs or cross members, attach the boxes directly to the walls. If the walls are hollow, mount the jack panel boxes on a board that is about two inches larger all around than the complete jack field (all the boxes mounted together). Then, mount the board on the wall.

Mount the jack panel box with

the screws provided or fasteners appropriate for your walls.

Mesh the tongue and groove of another jack panel box with the first. Mount the second box.

Black dot

Snap six modjack-to-modjack adapters into each jack retainer. Position the black dot on the left.

8 Customer Installation Instructions