Lucent Technologies 954 user manual Basic Intercom Operations, Making an Intercom Call or

INTERCOM OPERATION

This intercom features both a single-phone page and a system-wide page.

Asingle-phone page alerts only one phone; a system-wide page alerts all phones. Any phone with the Do Not Disturb (DND) feature activated will not receive a page.

An intercom call or single-phone page automatically activates the speakerphone on the receiving phone. You can deactivate the speakerphone by lifting the handset.

Use the first 12 memory buttons to make intercom and page calls. When using the intercom, these buttons are intercom stations 11 through 22.

Basic Intercom Operations

INTERCOM Any two stations connected to Line 1 can ring each other.

PAGE Lets you “announce” over the speaker of the phone you’re calling. The person you’ve called can respond just by talking.

ALLPAGE Lets you “announce” to all 954 phones in the system at the same time.

CONF Lets you connect another intercom call with an outside line.

TRNSFR Lets you receive an incoming call and redirect it to any 954 phone on the system.

Making an Intercom Call or Page

1Lift the handset and press Ior p. You’ll hear a tone.

2Press the memory button for the station you’re paging

— OR —

Use the keypad to enter the station number.

NOTE: When you direct an intercom call to one station, any station in the system can answer the call.

Answering an Intercom Call or Page

For an intercom call, press Kor Ior lift the handset.

For a page, begin talking (the speaker is activated) or lift the handset.

Ending an Intercom Call or Page

Press K.

22

Lucent 0954 book.L1 22 5/7/98, 10:36 AM