5.Use the CLI setup command to configure the switch.
6.Restore the binary configuration files of the release (3.1 or previous) you want to restore. These configuration files do not reflect any changes you made to the running configuration while using Release 4.0.1.
Problem: Release 4.0.1 of the Cajun switch contains new
Workaround: If you have a parameter in 3.1 that is outside the 4.0 range, it will be noted in the Script Log File. After the second reboot the switch, check the Script Log File to find out if any errors occurred as the script executed. To check the Script Log File, click Script Log File in the CLI Configuration section of the Web Agent. If errors were found, scroll up to find the particular error message. If you prefer to use the Enhanced CLI, at the system prompt, type: show file logfile.txt.
NOTES:
•Some of the associated CLI command incorrectly list “Multilayer” and “3Com”. These are not supported by the Cajun P550
•In Release 4.0.1 of the Cajun switch, the Web Agent provides a new set of dialog boxes in which you can:
-View startup and running configuration files
-View script execution log files
-Copy and manage configuration files
Ensure that you copy configuration files to a TFTP server or other storage location using the Configuration File Management dialog box.
Upgrading from Release 3.1 or Previous Releases
Use the following procedure to upgrade the switch from Release 3.1 to Release 4.0.1.
NOTE: The Cajun switch does not support a direct upgrade to Release 4.0.1 from releases prior to Release 3.0. If your switch runs a release prior to 3.0, upgrade the switch to Release 3.0 or 3.1. Then, use the following procedure to upgrade the switch from Release 3.0 or 3.1 to Release 4.0.1.
Cajun P220, P550, P550R Switch Release Notes, Release 4.0.1 | 10 |
