Lucent Technologies P220, P550R manual Ldap Commands

LDAP Commands

Table 1-9 shows new and changed LDAP commands in Release 4.0.1:

Table 1-9: LDAP Commands

Old Command	New Command	New Definition/Argument
ldap debug <debug-	N/A	Command removed from CLI.
level>
To Enable:	N/A	Command removed from CLI.
ldap producer-signal
<producer-signal>
To Disable:
[no] ldap producer-
signal <producer-
signal>
To Enable:	To Enable:	Please note the change to the no form
ldap search-base	N/A	of the command.
<search-base-dn>
	To Disable:
To Disable:	[no] ldap search-base
[no] ldap search-base
<search-base-dn>
To Enable:	To Enable:	The default port is 389.
ldap server primary	N/A	Please note the change to the no form
<ip-addr> [<port-num>]
		of the command.
	To Disable:
To Disable:	[no] ldap server
[no] ldap server	primary
primary <ip-addr>
[<port-num>]
To Enable:	To Enable:	The default IP address is 0.0.0.0.
ldap server secondary	ldap server secondary	Please note the change to the no form
<ip-addr> [<port-num>]	<ip-addr> [<port-num>]
		of the command.
To Disable:	To Disable:
[no] ldap server	[no] ldap server
secondary <ip-addr>	secondary
[<port-num>]

Cajun P220, P550, P550R Switch Release Notes, Release 4.0.1 32