Mackie HDR 24/96 SYNC Options

HD24/96 Technical Reference				78
Menu Selection	Submenus		What It Does
In	Selects the input port for DIO-8 cards
	1-8		Selects the Track 1-8 card for setup
	9-16		Selects the Track 9-16 card for setup
	17-24		Selects the Track 17-24 card for setup
			ADAT	Selects the ADAT port for input
			TDIF	Selects the TDIF port for input
Out	Same as above for the output port of the DIO-8 cards
StatUser Bits	Sets the Channel Status bits (pro/consumer format) for the PDI-8
	card. Not applicable for other I/Ocards.
			Turns input sample rate conversion on and off for
			PDI-8 cards.
Rate Convert	Turns input sample rate conversion on or off for PDI-8 cards.
Rate Convert
SYNC Options
Menu Selection	Submenus		What It Does
Sample Clock
	<<	>>	Selects the sample clock source: Internal, External
			wWord cClock (BNC), or vVideo blackburst (BNC)
	OK		Confirms the selection and returns to the SYNC
			OPTIONS menu
Sample Rate
	<<	>>	Selects 44.1 kHz or 48 kHz
	OK		Confirms the selection and returns to the SYNC
			OPTIONS menu
Time Code Source
	<<	>>	Selects between SMPTE and MTC, applicable when
			the HDR24/96 is in the Chase TC mode.
	OK		Confirms the selection and returns to the SYNC
			OPTIONS menu