HD24/96 Technical Reference

81

Appendix B – List of Parameters and How They’re Saved

Setup Parameters – What’s Saved and When

The HDR24/96 has many setup and configuration parameters and preferences, some of which you must set before use, others that you set in the course of working through your project. Some of these parameters remain as defaults until changed, some stick with the Project but revert to the original settings when you open a new project, others return to a factory default state whenever you switch projects or power up. This table lists all the parameters and control states, indicating under what circumstances they’re saved, and their default state.

Global Preferences

The current setting of these parameters and preferences become defaults. Each time you power up the HDR24/96, they come up in the same state as you last set them. They retain their settings when you switch Projects or Playlists, or open a new Project. Any change you make in these will be carried over to the next power-up or the next Project.

Active Drive

Mouse Speed

Window Frames Color Scheme

Waveform Color Scheme

Footswitch Function

Remote Footswitch Function

FTP Server IP Address

FTP Server Subnet Mask

FTP Server Gateway Address

PDI-8 I/O card Input Sample Rate Conversion

PDI-8 I/O card Channel Status Bits (Professional/Consumer)

DIO-8 I/O card Input Format (ADAT/TDIF)

DIO-8 I/O card Output Format (ADAT/TDIF/Convert)

Generate MTC

Generate SMPTE

MMC Device ID A, B, and C

Sample Clock Source (Internal/Word/Video)

Time Code Source (SMPTE/MTC)

Backup Source Disk Drive (front panel function only)

Backup Destination Disk Drive (front panel function only)

Record Safe (on/off)

One Button Punch (on/off)

Meter Mode (Peak/Average/Both)

Meter Peak Hold (Floating indicator on/off)

Solo Latch (on/off)

View Envelopes (on/off)