Mackie HDR 24/96 manual 79

HD24/96 Technical Reference				79
Time Code Rate
	<<	>>	Selects the time code frame rate: 30, 29.97, 25,
			and 24 frames/second, with choices of drop frame
			or non-drop frame for 30 and 29.97 FPS.
	OK		Confirms the selection and returns to the SYNC
			OPTIONS menu
Bit Depth (next	<<	>>
page [>])(->)	Selects between 16-bit and 24-bit recording
	<<	>>OK	Selects between 16-bit and 24-bit recording
			Confirms the selection and returns to the SYNC
			OPTIONS menu
	OK		Confirms the selection and returns to the SYNC
			OPTIONS menu
Generate SMPTE
(next page [>])
	<<	>>	Turns the SMPTE time code output On or Off.
			NOTE: You cannot simultaneously generate and
			chase to SMPTE. Setting this option On when the
			HDR24/96 is set to TC CHASE will result in a “You
			can’t do that” message.
	OK		Confirms the selection and returns to the SYNC
			OPTIONS menu
Generate MTC	(Off to the right. Accessed with the -> button)
(next page [>])
	<<	>>	Turns MIDI time code output On or Off
	OK		Confirms the selection and returns to the SYNC
			OPTIONS menu
TC Offset (next	Active only when chasing time code. When Offset is other than
page [>])	zero, the transport current time is equal to the incoming time code
	value plus the TC Offset value.
	Set
			<< >>	Moves the vv cursor over the hour,
				minute, second, or frame field. Use the
				(-)DEC and (+)INC buttons to
				decrement or incrementchange the
				value.
			Zero	Sets the time code offset to 00:00:00:00