DVD PLAYER OR OTHER VIDEO DEVICES WITH COMPONENT VIDEO CONNECTORS
Component Video Input (Y, Pb, Pr) provide the highest possible color and picture resolution in
the playback of digital signal source material, such as with DVD player.
Disconnect all power sources before making any connections.
1Using a Component Video cable (not supplied), connect the DVD player’s Y, Pb, Pr jacks to the Y, Pb, Pr jacks on the TV. Use the AV IN 3 connections.
Note: The Component (Y, Pb, Pr) Video Input in AV IN 3 connections can display SD (480i) image only. If your DVD player can output Progressive scanned or HD (High Definition) image, please refer to “Digital TV Receiver, or a Digital Satellite Receiver with HD (High Definition) Output” in next section.
2Using an AUDIO cable, connect the DVD player’s AUDIO OUT jacks to the TV’s AUDIO IN jacks in AV IN 3 connections.
3Use Source button on the remote control to select COMPONENT to watch DVD.
Note: 1. The Y, Pb, Pr jacks do not provide audio, so audio cables must be connected to provide sound.
1
Accessory device equipped with component video outputs
M E N U
|
| OK |
3 | SOURCE | P I P |
C C
2
12
